Avatec – Print is The Future

Mobile Menu
CART 0

Control

You can find Control function under the LCD display panel screen from first page.

Then you can modify some parameter under Control function as follows:

Temperature

You can find Temperature function under the LCD display panel screen from first page—-second page Control—– Temperature.

Then you can modify some parameter under Temperature function as follows:

Nozzle

This function allows you adjust Nozzle temperature when printing or not.

Bed

This function allows you adjust Heat bed temperature when printing or not.

Fan speed

This function allow you adjust Fan speed from 0 to 255rpm

Preheat PLA configuration

Fan speed

Preset fan speed from 0 to 255rpm 

Nozzle

Preset temperature from 190C to 240C, recommended temperature is 210C 

Bed

Recommended temperature is 60C

Preheat ABS configuration

Fan speed

Preset fan speed from 0 to 255rpm 

Nozzle

Recommended temperature is 230C 

Bed

Recommended temperature is 70C

Motion

You can find Motion function under the LCD display panel screen from first page—-second page Control—– Motion.

Then you can modify some parameter under Motion function as follows:

Z Height

Adjusting the Z height will determine the quality of the first layer 

Saving Adjustments

After modifying a parameter, the setting must be saved to take effect.

Load Adjustments

Reload parameter settings from memory

Restore failsafe

Restore to default machine settings